Section 17
Basic IED functions
17.8
17.8.1
17.8.2
17.9
17.9.1
478
3 is the Major revision of the manufactured product this means, functions or hardware is either
changed or enhanced in the product
4 is the Minor revision of the manufactured product this means, code is corrected in the product
•
SerialNo: the structure of the SerialNo is as follows, for example, T0123456 where
01
is the last two digits in the year when the IED was manufactured that is, 2001
23
is the week number when the IED was manufactured
456 is the sequential number of the IEDs produced during the production week
•
OrderingNo: the structure of the OrderingNo is as follows, for example,
1MRK008526-BA. This alphanumeric string has no specific meaning except, that it
is used for internal identification purposes within ABB.
•
ProductionDate: states the production date in the "YYYY-MM_DD" format.
Primary system values PRIMVAL
Identification
Function description
Primary system values
Application
The rated system frequency and phasor rotation are set under Main menu/
Configuration/ Power system/ Primary values/PRIMVAL in the local HMI and
PCM600 parameter setting tree.
Signal matrix for analog inputs SMAI
Identification
Function description
Signal matrix for analog inputs
IEC 61850
IEC 60617
identification
identification
PRIMVAL
-
IEC 61850
IEC 60617
identification
identification
SMAI_20_x
-
1MRK 506 334-UUS A
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
Application manual