Installing A Registered Music Source On A G700 Or G350 Media Gateway - Avaya G700 Installing Manual

Telephones and adjunct systems
Installing a registered music source on a G700 or G350 Media
Gateway
Figure 47 show the connections for the music-on-hold feature on a G700 Media Gateway for a
registered source.
Note:
The G350 Media Gateway's physical connection with the MM711 Analog Media
Note:
Module, MM714 Analog Media Module, or fixed analog ports (LINE 1 or 2) on the
front panel is the same as the G700 Media Gateway's connection with the
MM711 Analog Media Module.
Note:
If you want multiple music sources, you must use multiple ports on the MM711
Note:
Analog Media Module.
Figure 47: Registered music-on-hold equipment connecting to KS-23395-L4 for a G700
Media Gateway
1
cydfhld2 KLC 021303
Figure notes:
1. G700 Media Gateway
2. MM711 Analog Media Module
3. RJ-45 connection
To connect a registered music-on-hold source to a G700 or G350 Media Gateway
using a KS-23395-L4 coupler:
1. Connect one end of an RJ-45 cable to a port in the MM711 Analog Media Module.
For a G350 Media Gateway only, connect the RJ-45 cable to a port in an MM714 Analog
Media Module or a fixed analog (LINE 1 or 2) port on the G350 front panel.
2. Connect the KS-23395-L4 coupler to the customer-supplied music source.
Normally, you simply use a 8-pair modular cord.
3. Administer the switch for the new equipment.
440 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
ALM SO EI SM EM SI EO
TST
ACT
SIG
E1/T1
ALM ALM
TST TST
ACT ACT
SHUT DOWN
OK TO
REMOVE
SERVICES USB 1 USB 2
1 2 3 4
ALM
TST
ACT
1 2 3 4
3
EIA 530A DCE
2
5 6 7 8
5 6 7 8
4
4. KS-23395-L4 coupler
5. 8-pair modular cord
6. Music source
6
5