Mitsubishi Electric GOT2000 Connection Manual page 151

*2 From the value of GD10 to 25, the upper 8bits are set for station No., and the lower 8bits for the Sub Station.
In this case, the setting of [Sub Station] is invalid.
The following shows the relation between station numbers of the control equipment and the GOT data register.
Station No.
100
101
114
115
Example: When [Station No.] is set to 100
When [Station No.] is set to 100, the monitoring target is set based on the GD10 value.
GD10 = 0x010A
(Upper 8bits) 0x01
(Lower 8bits) 0x0A
POINT POINT POINT
Station No. and Sub Station of AZBIL DMC50
The station No. and Sub Station set when using AZBIL DMC50 correspond to NW No. and Station number of
MITSUBISHI PLC, respectively.
GOT data register (GD)
GD10
GD11
: :
GD24
GD25
Station No.: 1
Sub Station: 10
3. CONNECTION TO AZBIL CONTROL EQUIPMENT
Setting range
0x0000 to 0xFFFF
3.6 Device Range that Can Be Set
3
3 - 59