Connecting To Aur350C, Aur450C - Mitsubishi Electric GOT2000 Connection Manual

3.5.14 Connecting to AUR350C,
AUR450C

Communication settings
Make the communication settings by operating the
Smart Loader Package (SLP-A35, SLP-A45) of the
control equipment.
Item
*1
9600bps, 19200bps
Transmission speed
8-bit data length, Even parity, Stop bit 1
Communication condition
*1
selection
8-bit data length, Non parity, Stop bit 2
*2*3
0 to F
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.

Station address setting
Set the station address switch.
(1) For AUR350C
(2) For AUR450C
S
Set value
Station No. setting switch
Station No. setting switch
3. CONNECTION TO AZBIL CONTROL EQUIPMENT
3.5.15 Connecting to RX

Communication settings
Make the communication settings by operating the
Smart Loader Package (SLP-RX) of the control
equipment.
Item
*1
9600bps, 19200bps ,38400bps
Transmission speed
Even parity stop 1
(8-bit data length, Even parity, Stop bit 1)
Even parity stop 2
(8-bit data length, Even parity, Stop bit 2)
Communication condition
*1
selection
Odd parity stop 1
(8-bit data length, Odd parity, Stop bit 1)
Odd parity stop 2
(8-bit data length, Odd parity, Stop bit 2)
*2*3
1 to 32
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.
3.5.16 Connecting to CMC10B

Communication settings
Make the communication settings by operating the
Smart Loader Package (SLP-CM1) of the control
equipment.
Item
*1
9600bps, 19200bps
Transmission speed
0:8-bit data length, Even parity, Stop bit 1
*1
Communication format
1:8-bit data length, Non parity, Stop bit 2
*2*3
0 to 99
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of
other units.

Station address setting
Set the station address switch.
Station No. setting switch
3.5 Control Equipment Side Setting
3
Set value
Set value
3 - 55