Got Side Settings; Setting Communication Interface (Communication Settings) - Mitsubishi Electric GOT2000 Connection Manual

3.4 GOT Side Settings

3.4.1 Setting communication
interface (Communication
settings)
Set the channel of the connected equipment.
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: Azbil
• Controller Type: Set either of the followings.
<Connecting to DMC50 and AHC2001>
Azbil DMC50
<Connecting to a module other than above>
Azbil SDC/DMC
• I/F: Interface to be used
• Driver: Azbil SDC/DMC
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
3.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
3.
4.
Click!
3. CONNECTION TO AZBIL CONTROL EQUIPMENT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.2 I/F communication setting
3.4 GOT Side Settings
3
3 - 49