Mitsubishi Electric GOT2000 Connection Manual page 31


Setting item
The following describes the setting items for the standard I/F setting and extension I/F setting.
Item
Standard I/F setting Set channel No. and drivers to the GOT standard interfaces.
Set the CH No. according to the intended purpose.
0: Not used
1 to 4: Used for connecting a controller of channel No. 1 to 4 set in Setting connected equipment (Channel
CH No. 5 to 8: Used for barcode function, RFID function, remote personal computer operation function (serial)
9: Used for connecting Host (PC), Ethernet download
A: Used for the report function (with a serial printer), hard copy function (with a serial printer), remote personal
Multi: Used for multi-channel Ethernet connection
I/F The communication type of the GOT standard interface is displayed.
Set the driver for the device to be connected.
Driver
• None • Host (Personal computer) • Each communication driver for connected devices
Make settings for the transmission speed and data length of the communication driver.
Detail Setting
RS232 To validate the 5V power supply function in RS232, mark the [Enable the 5V power supply] checkbox.
Setting The RS232 setting is invalid when the CH No. of [I/F-1: RS232] is [9].
Extension I/F setting Set the communication unit attached to the extension interface of the GOT.
Set the CH No. according to the intended purpose.
The number of channels differs depending on the GOT to be used.
0: Not used
1 to 4: Used for connecting a controller of channel No. 1 to 4 set in Setting connected equipment (Channel
CH No.
5 to 8: Used for barcode function, RFID function, remote personal computer operation (serial)
A: Used for the video/RGB display function, multimedia function, external I/O function, operation panel function,
setting)
computer operation function (Ethernet), VNC server function, gateway function, and MES interface function.
Refer to each chapter of the equipment to be connected to the GOT.
setting)
RGB output function, report function, hard copy function (with a printer), sound output function, gateway
function, MES interface function, and wireless LAN connection.
1. PREPARATORY PROCEDURES FOR MONITORING
Description
1.1 Setting the Communication Interface
1
1 - 9