Mitsubishi Electric GOT2000 Connection Manual page 140


Precautions when preparing a cable
(1) Cable length
The length of the RS-485 cable must be 500m or less.
(2) GOT side connector
For the GOT side connector, refer to the following.
1.4.1 GOT connector specifications
(3) AZBIL control equipment side connector
Use the connector compatible with the AZBIL control
equipment side module.
For details, refer to the user's manual of the AZBIL
control equipment.

Connecting terminating resistors
(1) GOT side
Set the terminating resistor by operating the terminating
resistor setting switch.
For the procedure to set the terminating resistor, refer
to the following.
1.4.3 Terminating resistors of GOT
(2) AZBIL control equipment side
When connecting a AZBIL control equipment to the
GOT, a terminating resistor must be connected.
3.5 Control Equipment Side Setting
3 - 48
3. CONNECTION TO AZBIL CONTROL EQUIPMENT
3.3 Connection Diagram