Chapter 5. DSLT Features
Intercom Calling
(All Versions)
Descriptions
Operation
Technical Manuals Online! - http://www.tech-man.com
routed to the extension defined in permanent call forwarding.
The following types of incoming trunk calls will follow permanent call
forward settings:
The DND feature cannot be activated at an extension selected to receive
l
Call Forwarding.
The DBS provides two methods of intercom calling: voice calling and tone
calling.
Voice Calling.
With voice calling, intercom calls are connected
immediately, without a ringing tone.
Tone Calling.
With tone calls, a ringing tone is sent to the called extension.
System programming determines whether the DBS uses voice or tone calling
as a default. If voice calling is the default, dialing a "1" after the extension
number will change the call to a tone call. If tone calling is the default, dialing
a "1" will result in a voice call.
To make a Voice Call:
1. Lift the handset.
2. Dial the extension number.
3. If the system default is tone calling, dial a "1."
To make an Tone Call:
1. Lift the handset.
2. Dial the extension number.
Section 700 - Operation