Answer Supervision For Voice Mail - Panasonic DBS 40 Operating Manual

Chapter 2. System Features

Answer Supervision for Voice Mail

Description
Operation
Page 2-6
Technical Manuals Online! - http://www.tech-man.com
The maximum number of verified account codes is 100.
l
Each verified account code must consist of 4 digits.
l
"0000" cannot be used for a verified account code.
l
Verified account codes do not override station lockout.
l
Verified account codes do not override Least Cost Routing (LCR) settings.
l
With CPC-AlI and CPC-B Version 3.1 to 5.04, non-verified account codes
l
can be used. However, they can only be used on a voluntary basis. Forced
non-verified
account codes are not available with CPC-B 3.1 to 5.04.
This feature allows the DBS to send an answer signal to third-party voice
mail systems.
In previous releases, a third-party voice mail did not receive a signal to
indicate that a DBS extension had answered. To determine that the extension
had answered, the voice mail system had to wait until it stopped receiving
times for calls from voice mail to extensions. Sending an answer signal
provides quicker response time between the DBS and the voice mail system.
The following programming can be performed from an attendant phone or
any other phone that has entered the programming access code.
To assign an answer signal code:
1. Press the ON/OFF key.
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
2. Press the PROG key.
3. Dial 'W4."
Section 700 - Operation
DBS-70-700