Dial Tone Disable; Dss/72 - Panasonic DBS 40 Operating Manual

Considerations

Dial Tone Disable

(All Versions)
Description
- -
Technical Manuals Online! - http://www.tech-man.com
l
l
If all ML keys on all attendants are busy, internal calls are transferred to a
l
preset destination, which must be a real extension number. The forwarding
destination cannot be the pilot number of a hunt group.
The third and fourth attendants cannot have a DSS/72.
l
Prior to CPC-B Version 2.0, the DBS supported a maximum of two
l
attendant positions.
In previous software releases, if a user dialed "0" for the attendant group
l
but the first attendant had call forwarding activated, the call would skip to
the next attendant in the group. For example, if the first attendant activated
call forwarding--busy/no answer. the dial "0" call would skip to the second
attendant. If ai: attendants in the group activated call forwarding, dial "0"
calls did not reach the group.
Beginning with CPC-B Version 5.0, dial "0" calls ring the first attendant,
even if the first attendant has call forwarding activated. However, if a call is
unanswered, it does not skip to the next attendant. The call continues to
ring the first attendant until the caller hangs up.
l
Ringing assignments will be required for all attendants other than
l
Attendant Position 1 (Port 1) and Attendant Postion 2 (when assigned to
port 2).
The intercom dial tone can be turned off at an attendant phone. Dial tone is
turned off when a headset is used.
DBS Manual - Issued 8/l/95
be used for attendant positions.
Section 700 - Operation
DBS-70-700