Caller Id Nut0 Disa - Panasonic DBS 40 Operating Manual

Considerations
Caller ID' Auto DISA
(CPC-A II Version 6.1 or higher and CPC-B Version 6.1 or higher)
Related Programming
Hardware Requirements
Considerations
DBS-70-700
Technical Manuals Online! - http://www.tech-man.com
Caller ID service must be ordered from the local telephone operating
l
company or the interexchange carrier.
A DBS equipped for Caller ID (CID) can provide automatic DISA dial tone
based on Caller ID information. This allows up to 10 predetermined users to
access the DISA feature without requiring a trunk be left in the DISA mode.
When a CID call is sent to the DBS, the CID number is checked against the
table. If the number is found, the caller will automatically be connected to
DISA dial tone.
. FFl (System Programming): Automatic DISA
Loop-start trunk card (VB-435 11.4)
l
Caller ID circuit card (VB-435 11)
l
MFR card (Caller ID Auto DISA)
l
Caller ID feature must be enabled.
l
DBS Manual - Issued 8/l/95
Page 2-15