Call Hold - Panasonic DBS 40 Operating Manual

Chapter 6. SLT Features

Call Hold

Operation
Related Programming
6-10
Technical Manuals Online! - http://www.tech-man.com
Call Hold provides either exclusive or system hold, depending on system
programming, With Exclusive Hold, only the extension that held the call
retrieve it. With System Hold, another extension can retrieve the call.
To place a call on Hold:
Flash the switchhook.
To release the call:
Flash the stitchhook again.
l
l
l
FF3 (Extensions): Single Line Telephone Hookflash (Broker's Hold/
l
Conference)
l
A held call recalls if it is not retrieved before the Hold Recall Timer
l
e x p i r e s .
If there is no response to the Hold RecalI, the call transfers to the Attendant
l
Phone; however, no tone sounds at an Attendant Phone if Night Mode is
activated. .
l
l
call on hold and then made an intercom call, make sure the other extension
Section 700 - Operation
can
OBS-70-700