Panasonic DBS 40 Operating Manual page 191

Section 700 - Operation
Related Programming
Considerations
Technical Manuals Online! - http://www.tech-man.com
3. Dial the telephone number.
The number appears on the display.
4. Complete the call and replace the handset.
The LED of the ML or MC0 key goes off.
To select a Pooled Trunk group that is not assigned to an FF key:
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
2. Enter the desired group number (8 l-86, 9).
The phone issues outside dial tone.
l
"CO TALK #XX" (Where "XX" is the line number) appears on the
l
display.
3. Dial the telephone number.
The number appears on the display.
4. Complete the call and replace the handset.
l
FF2 (Trunks): Pooled Trunk Access for Group "9"
l
FF2 (Trunks): Pooled Trunk Access for Group "9"
l
FF3 (Extension): Forced Least Cost Routing
l
l
l
The LED of the ML or MC0 key lights red and the phone issues busy tone
l
when all lines in the same group are busy. (Those lines cannot be
accessed.)
Chapter 4. Key Telephone Features
key.
4-81