Download  Print this page

Ml/mc0 Separation - Panasonic DBS 40 Operating Manual

Digital business system.
Hide thumbs


Section 700 - Operation
Table 4-8. MCOIML availability
Related Programming
Technical Manuals Online! -
When a CO call or an Intercom Call arrives, a search begins for a Multi-
Line key not in use. The lower numbered FF keys will be searched first.
When a free Multi-Line key is found, the LED flashes green and the
extension rings.
extension goes off and the ringing stops, indicating that the Multi-Line key
on your te!ephone is no longer in use.
When dialing an extension number, the system automatically selects the
free Multi-Line key w-i th the lowest number.
If the CO line or held extension does not respond before the Recall Timer
expires, the extension rings and the Multi-Line key flashes green.
If LCR is enabled, ML keys can be assigned for trunk group 89. However,
the FF keys will not light.
Beginning with CPC-B Version 4, each extension can have either MC0 or
ML keys. Ln previous software versions, MC0 or ML keys were only
available on a system-wide basis, and the type of key that was available
differed according to the software release. Table 4-7 contains definitions of
CPC Version
CPC-B 1.0
CPC-B 2.0 - 3.1
4.0 and above
FF3 (Extension): ML/MC0 Separation
Chapter 4. Key Telephone Features
ML only
issued $11 I95
4-65 -


Table of Contents

   Also See for Panasonic DBS 40

   Related Manuals for Panasonic DBS 40

This manual is also suitable for:

Dbs 96Dbs 72

Comments to this Manuals

Symbols: 0
Latest comments: