Download  Print this page

Dial "0" For Attendant - Panasonic DBS 40 Operating Manual

Digital business system.
Hide thumbs

Advertisement

Section 700 - Operation
Related Programming
Considerations

Dial "0" for Attendant

(CPC-AII and CPC-B Version 2.0 or higher)
Description
Operation
DBS-70-700
Technical Manuals Online! - http://www.tech-man.com
add
To
an outside number (CPC-All and CPC-B Version 3.1 or
higher):
1. Flash the switchhook to place the current call on hold.
2. Dial a trunk group number (8 l-86 or 9).
3. Dial the outside number.
4. Flash the switchhook when your call is answered.
FF3 (Extension): Single Line Telephone Hookflash (Brokers Hold/
l
Conference)
Call Waiting tone can be received during conference calls. however. you
l
cannot respond to call waiting until the completion of the conference call
because you cannot place the parties in the conference on hold.
A switchhook flash is ignored during a conference call.
l
Calls forwarded externally cannot create a conference.
l
The Hold feature cannot be used during a three-party conference.
l
Users can call the Attendant from any extension by pressing "0."
If multiple attendants are assigned, a dial "0" call goes to Attendant "1" first.
If attendant "1" is busy, the call goes to Attendant "2." The call continues to
transfer to the next attendant in the attendant group if necessary.
A maximum of four attendants can be assigned.
1. Lift the handset.
DBS Manual - Issued 8/l/95
Chapter 6. SLT Features
6-21

Advertisement

Table of Contents

   Also See for Panasonic DBS 40

   Related Manuals for Panasonic DBS 40

This manual is also suitable for:

Dbs 96Dbs 72

Comments to this Manuals

Symbols: 0
Latest comments: