Auto Redial; Barge-In For Direct Lines - Panasonic DBS 40 Operating Manual

Chapter 4. Key Telephone Features

Auto Redial

and CPC-B Version 7.0 or higher)
Description
Related Programming

Barge-In for Direct Lines

Description
Operation
Related Programming
Considerations
4-6
Technical Manuals Online! - http://www.tech-man.com
If the Redial key is pressed when the extension is idle or receiving dial tone,
the last intercom or outside number is automatically redialed.
FF3 (System): Auto-Redial on Extensions
l
Barge-in for Direct Lines allows users to break into a busy Direct Line (DL)
and create a three-party conference. '
A direct line is a call appearance used to originate and receive calls over a
specific trunk number.
To barge into a busy Direct fine, press the lit DL key. (The DL key will be lit
red.)
Barge-in for Direct Lines is controlled by the program settings for Busy
Override. For instance, if an extension with a DL key does not want theDL
broken into, that extension must have "Busy Override Receive" turned off.
Paging Groups, Both extensions must belong to the same paging group (l-
7). Paging group 0 does not allow override.
Override Restrictions. Barge-in for Direct Lines cannot override a DL under
the following conditions:
When the DL is in a conference call
l
DBS Manual - Issued 8/l/95
Section 700 - Operation
UBS-70-700