Auto Day Mode - Panasonic DBS 40 Operating Manual

Chapter 2. System Features
Related Programming
Considerations

Auto Day Mode

(CPC-B Version 7.0 or higher and CPC-A II Version 7.0 and higher)
Description
Related Programming
Page 2-8
Technical Manuals Online! - http://www.tech-man.com
l
l
If both auto modes are set, the starting times must differ by at least one
l
hour.
When one auto mode is turned on, the mode cannot be reset by the
l
key until 3 minutes after the auto mode is activated. (When both auto
NIGHT
modes are set, the
NIGHT
If a key is not assigned, the access code #52 can be used instead.
l
Auto Day Mode allows the DBS to go into day mode automatically.
The DBS can also be programmed to go into night mode automatically (see
"Night Service," page 2-37).
If only one of .the auto modes is turned on, the
DAY, NIGHTl,
toggle key or the
NIGHT1
mode. For instance, if
attendant must press the
to go into day mode. (Note: You must wait at least 3 minutes after the
automatic mode is activated before manually changing the mode. Otherwise
the system will immediately revert back to the automatic mode.)
only one of the modes is turned on, the
If auto
DAY, NIGHTl,
toggle key or the
an auto mode before the scheduled time. If auto day and both auto night
modes are turned on, the manual mode keys can be used,
l
l
DBS Manual - Issued 8/l/95
Section 700 - Operation
key cannot be used.)
NIGHT2
or is used to turn off the auto
mode has been activated automatically, the
NIGHT2
or key can also be used to go into
NIGHT
DAY
key or the key
DBS-70-700