Panasonic DBS 40 Operating Manual page 173

Section 700 - Operation
Operation
Operation
To originate a trunk call
To place a call on Exclusive Trunk Hold (page 4-36)
To place a call on System Trunk Hold (page 4-17)
To transfer a call
Related Programming
Considerations
Technical Manuals Online! - http://www.tech-man.com
An MC0 key can be assigned to any of the pooled trunk groups. See "Pooled
Trunk Access" on page 4-80 for more information.
See "ML/MC0 Separation" (page 4-64) for information on assigning both
ML and MC0 keys to the same system (CPC-AII and CPC-B Version 4 or
higher).
l
FF2 (Trunks): Pooled Trunk Access for Group "9"
l
FF2 (Trunks): Pooled Trunk Access for Groups "8 l-86"
l
FF3 (Extension): Forced Least Cost Routing
l
l
l
When all trunks in a group are busy, the corresponding MC0 key lights
l
red.
If LCR is enabled, MC0 keys can be assigned for trunk group 89.
l
However, the FF keys will not light.
Press the MC0 key that flashes red to answer an outside call.
l
There are seven groups of outside lines: 9 and 81-86.
l
DBS Manual - Issued 8/l/95
Chapter 4. Key Telephone Features
Action
Press an idle MC0 key.
The key blinks (green) as the call is made.
Press the MC0 key.
the HOLD
Press key.
HOLD,
Press dial the destination exten-
PROG.
sion, then press
4-63