Chapter 6. SLT Features
VRS Call Forwarding features
Technical Manuals Online! - http://www.tech-man.com
You cannot break in on three-party conference calls.
The default for the override alert tone is "off." If the override alert tone is
enabled, the tone will be sent to both parties when a call is overridden.
Call Forwarding allows users to send their calls to another extension, to an
outside line, or to voice mail. All versions of the DBS provide call
forwarding; however, some call forwarding enhancements are not available
with earlier versions. The following table shows the call forwarding features
available with each release.
Call Forwarding--All Calls
Cal 1 Forwarding--Busy
, Call Forwarding--Busy/No Answer
Call Forwarding--All Calls.
calls to an extension are forwarded immediately.
Call Forwarding--No Answer.
unanswered call rings until the Call Forward No Answer timer expires. When
the timer expires, the unanswered call is forwarded.
to a busy extension are forwarded to a designated extension.
-- -- DBSManual--- Issued 8/l/95
Section 700 - Operation
CPC-AI1 and CPC-B Version 2.0
CPC-A, CPC-AII prior to 7.0 and
CPC-B prior to 7.0. Beginning
with CPC-AII and CPC-B Ver-
sion 7.0, all forwarding types (All
Calls, No Answer, Busy, Busy/No
Answer) allow call forwarding
outside -- eliminating the need for
When this feature is activated, all incoming
When this feature is activated, an
When this feature is activated, all incoming calls