Panasonic DBS 40 Operating Manual page 186

Chapter 4. Key Telephone Features
Considerations
4-76
Technical Manuals Online! - http://www.tech-man.com
6. Enter the telephone number.
7. Press the HOLD key.
8. Press the ON/OFF
The ON/OFF LED goes off.
To check a programmed One-Touch key:
1. Press the ON/OFF
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
2. Press the CONF key.
3. Press the One Touch key to be checked.
The programmed data appears on the display.
4. Press the ON/OFF key.
The ON/OFF LED .goes off.
l
The date and time appears on the display.
l
If the pause following an access code is too short, press the REDIAL key
l
more than once.
A One-Touch key can be programmed to automatically access a CO line
l
before dialing a personal speed dial number.
Select an outside line group when you program a One-Touch key. A free
l
line is selected from that group when you dial out. (Group 9 can be
programmed to select LCR automatically.) The following table shows the
available outside line groups and their corresponding code numbers:
key.
key.
Section 700 - Operation