Section 700 - Operation
Operation
Technical Manuals Online! - http://www.tech-man.com
assign pre-programmed codes to an FF key:
To
1. Press the ON/OFF
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
2. Press the PROG
"F" appears on the display.
3. Press the FF key to be programmed.
"Enter Code" appears on the display.
4. Enter the code to be programmed (see Table 4-6).
The programmed code appears on the display.
5. Press the HOLD key.
"Code Stored" appears on the display.
6. Repeat steps 2-5 to program additional keys.
7. Press the ON/OFF key.
The ON/OFF LED goes off.
To assign.digits to an FF key:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the FF key to be programmed.
"Enter Code" appears on the display.
4. Enter up to six digits.
5. Press the HOLD key.
Chapter 4. Key Telephone Features
key:
key.
-