Download  Print this page

Panasonic DBS 40 Operating Manual Page 159

Digital business system.
Hide thumbs

Advertisement

Section 700 - Operation
Technical Manuals Online! - http://www.tech-man.com
"ENTER FWD EXTW appears on the display.
6. Press the AUTO
7. Enter the Speed Dial code (System Speed dial 00-89 or Personal Speed
dial 90-99 or 900-909).
Note: The speed dial code must include the
trunk call), the appropriate trunk access code, and the outside number.
8. Press the HOLD
Calls will now be forwarded according to the forwarding type selected.
To assign Call Forwarding to a Hunt Group pilot number or an
extension number to an FF key:
ON/OFF
1. Press the
2. Press the PROG
3. Press the FF key to be programmed.
"Enter Code" appears on the display.
4. Enter "72."
5. Enter the Call Forwarding code (0, 1, 2, or 4).
6. Enter the Hunt Group pilot number or an extension number.
7. Press the HOLD
To erase a code stored in an FF key:
FF keys assigned as CO lines cannot be cleared using the following
Note:
procedure. CO line keys can only be cleared through system programming.
ON/OFF
1. Press the
2. Press the PROG
3. Press the FF key to be programmed.
"Enter Code" appears on the display.
4. Press the HOLD
"Code Cleared" appears.
Chapter 4. Key Telephone Features
key.
key.
key.
key.
key.
key.
key.
key.
CONF
key (to indicate a

Advertisement

Table of Contents

   Also See for Panasonic DBS 40

   Related Manuals for Panasonic DBS 40

This manual is also suitable for:

Dbs 96Dbs 72

Comments to this Manuals

Symbols: 0
Latest comments: