Download  Print this page

Tl Interface - Panasonic DBS 40 Operating Manual

Digital business system.
Hide thumbs


Chapter 2. System Features
(CPC-B Version 4.0 or higher)
Related Programming
Hardware Requirements
Technical Manuals Online! -
The Tl Interface is a digital trunk card that provides twenty-four 64 kbps
channels, for a total transmission rate of 1.544 Mbps. Tl lines can be leased
from local exchange carriers and long-distance carriers.
The DBS Tl Interface supports the following options:
SF or ESF Framing Formats
Either super frame (SF) or extended super frame (ESF) formats can be used
with the DBS Tl.
The superframe consists of 12 frames, with each frame including 193 bits.
Each frame is separated by a framing bit.
An extended
super frame consists of 24 frames, double the length of the super
frame (SF) format. ESF also supports monitoring and maintenance
capabilities that are not available with the SF format.
Flexible Trunk Signaling Modes
The Tl Interface provides the following punk signaling modes. The
signaling modes can be assigned on a per-channel basis:
Loop start
Ground start
FF2 (Trunks): Trunk Type
FF2 (Trunks): Trunk Port Class
FF3 (Extension): Station Port Class
The following hardware is required to install a Tl in a single cabinet:
Section 700 - Operation


Table of Contents

   Also See for Panasonic DBS 40

   Related Manuals for Panasonic DBS 40

This manual is also suitable for:

Dbs 96Dbs 72

Comments to this Manuals

Symbols: 0
Latest comments: