Dss/Blf Appearances - Panasonic DBS 40 Operating Manual

Chapter 4. Key Telephone Features
(CPC-AIL and CPC-B Version 2.0 or higher)
Description
4-60
Technical Manuals Online! - http://www.tech-man.com
Appearances
When a DSS/BLF key is programmed, it automatically provides direct station
selection busy lamp field for the assigned extension number. If desired,
and
the DSS,BLF key
can
For example, you can set extension A as a DSS/BLF key on extension B.
When extension A rings, the LED of the DSS/BLF key on,extension B
flashes. If extension B answers the call by pressing the DSS/BLF key, the
LED on extension A goes off and the call remains only on the DSS/BLF key
of extension B.
Ringing can be set on either one or both extensions. If the extensions are not
set for ringing, the LED of the DSS/BLF key will flash red. If the extensions
are set for ringing, the LED will flash green.
When extension A is in
light red. If one extension has the Absence Message, Call Forwarding, or Do-
Not-Disturb feature activated, the DSVBLF key will light green.
To assign a DSS/BLF key:
PROG
1. Press the
2. Press the FF key you want to assign the DSS/BLF appearance to.
3. Dial the extension number.
4. HOLD
Press the
To make an intercom call using the DSS/BLF key:
Press the idle DSS/BLF key.
To pick up a call on a DSSlBLF key:
Press the flashing DSS/BLF key.
DBS Manual - Issued 8/l/95 -~
also provide ring monitor.
the LED of the DSS/BLF key on extension B will
use,
key.
key.
Section 700 - Operation
DBS-70-700