Panasonic DBS 40 Operating Manual page 215

Section 700 - Operation
Related Programming
Considerations
Table 5-2. Example Return Times for Absence Messages
Technical Manuals Online! - http://www.tech-man.com
To Cancel an Absence Message
1. Lift the handset or press ON/OFF.
2. Dial "7 1."
3. Replace the handset or press ON/OFF.
l
Version 3.1 or higher)
FF3 (Extension) Extension Class of Service Assignment (CPC-AI1 and
l
CPC-B Version 3.1 or higher)
FF6 (Names and Messages): Absence Messages
l
Extensions without displays get a busy signal, rather than the Absence
l
Message.
If an extension user selects a message code number 5-9 that has not been
l
set up with a message, "Absence," followed by the code number, appears
on the caller'sdisplay.
Absence Message return times can be entered as shown in Table 5-2:
l
Four-digit numbers can also be entered (0000-9999 = Hours & Minutes or
Month & Date).
In CPC-A and WC-B Versions prior to 5.0, DND and Absence Messages
cancel Call Forwarding. Beginning with Version 5.0, calls to an extension
with DND or Absence Message turned on are treated differently, depending
on whether they are trunk or intercom calls. Intercom calls receive busy
tone; trunk calIs are routed to the extension defined in Permanent Call
DBS Manual - Issued 8/l/95
Display
Input
No input Return
9 Return 9:00
11 Return 1l:OO
615 Return 6:lS
1035 Return lo:35
.
Chapter 5. DSLT Features
5-5