Panasonic DBS 40 Operating Manual page 135

Section 700 - Operation
Related Programming
Considerations
Technical Manuals Online! - http://www.tech-man.com
l
l
l
l
l
For users to transfer calls by pressing
l
going onhook, the Onhook Transfer feature must be enabled in system
programming.
If Onhook Transfer is disabled, blind transfer is performed by pressing
l
HOLD,
dialing the extension number, pressing
If Onhook Transfer is enabled, users can transfer calls by pressing
l
before going onhook.
The Attendant can transfer calls while the handset is still in place, even if
l
the system is not set for Onhook Transfer.
You cannot transfer a call to an extension that has Do Not Disturb or
l
Absence Message activated.
You can transfer a call to an extension that has Call Forwarding activated.
l
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if extension "A" is forwarded to extension "B," calls that are
transferred to extension "A" will be forwarded to extension "B."
When you transfer a call to an extension that is busy or does not answer
l
and does not have Call Forwarding activated, the transfer will recall to
your extension after the Transfer Recall Timer expires. The other
extension's number and the number of the transferred CO line or extension
will appear on your display.
(For example, if you transfer an outside call on line 1 to extension 135 and
that extension does not answer, the call will return to your extension and
"Recall 135 #ol" will appear on the display.)
Chapter 4. Key Telephone Features
HOLD,
dialing the extension, and
.
PROG,
and then going a
PROG