Attendant-Controlled Text Assignment - Panasonic DBS 40 Operating Manual

Chapter 3. Attendant Features

Attendant-Controlled Text Assignment

(All Versions)
Description
Operation
3-8
Technical Manuals Online! - http://www.tech-man.com
The attendant can assign text to extensions, system speed dial numbers, and
Call Waiting/OHVA text replies without using a DSS/72 or entering the
programming mode.
Text is assigned through the dial pad on the attendant phone.
To assign names to extensions:
Pick up the receiver or press the ON/OFF key.
1.
2.
Press, YKOG.
3.
Dial #2.
4. Enter the extension's port number. (This must be entered as a 3-digit
number if CPC-B is used or a 2-digit number if CPC-A or CPC-AII is
used. If necessary add leading zeros.)
Press AUTO to backspace and erase the existing name.
5.
6. Use the dialpad sequences shown in Table 3-l on page 3-10 to enter
letters and/or numbers.
Press FLASH after each letter or number.
Press CONF to switch between numbers and letters.
To store your entry, press HOLD.
7.
To assign names to System Speed Dial numbers:
1. Pick up the receiver or press the ON/OFF key.
2. Press PROG.
3 . Dial#l
4. Press AUTO.
5. Dial the desired of system speed dial number (00-89).
DBS Manual - Issued 8/l/95
Section 700 - Operation
DBS-70-700