Section 700 - Operation
Table 5-4. Call Waiting Text Messages
Technical Manuals Online! - http://www.tech-man.com
You can send a Call Waiting signal, followed by a brief LCD message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your
The following messages can be sent using the Call Waiting feature:
Message codes O-4 cannot be used.
To Set Call Waiting:
1. Lift the handset.
2. Dial-the extension number.
3. Upon hearing busy tone, press "3."
4. If you wish to send a text message, dial the desired message code (5-7 or
The message appears on the called party's phone if the called party has a
display phone. (If the extension does not have a display, it will continue to
issue a call waiting tone.)
5. Remain on the line until the called party picks up.
To answer Call Waiting (after disconnecting the current call):
1. Replace the handset.
Chapter 5. DSLT Features