Making Calls; Intercom Calling - Panasonic kx-ta6246 Operating Instructions Manual

1.3

Making Calls

Intercom Calling

Allows you to make a call to another extension.
Using the handset
Any Telephone
Lift the handset.
Using the Speakerphone
PT
SP-PHONE
or
Press SP-PHONE
or INTERCOM.
Using a DSS (Direct Station Selection) button
PT
Lift the handset or press
SP-PHONE/MONITOR.
• After dialling an extension number, you will hear one of the following tones.
!
!
Ringback tone: Indicates the destination extension is being called.
Confirmation tone: Indicates you can perform voice calling (e.g. Paging).
Busy tone: Indicates the destination extension is busy.
Do Not Disturb (DND) tone: Indicates the destination extension has set the "Do Not
PT • An extension number and a name, if programmed, are shown on a display PT during an
intercom call.
• You can assign a DSS button on a flexible button in Proprietary Telephone Settings. The
PT
stored number can be displayed in the following way.
1. Set the MEMORY switch to "PROGRAM".
2. Press the desired button while on-hook.
The number will be displayed. After checking the number return the MEMORY switch to
the "SET" position.
• You can press a flexible button assigned as a DSS button directly to make an intercom call
PT
without going off-hook. It can be done by System Programming.
• 1.2 Proprietary Telephone Settings, "Customising the Buttons on Your Telephone",
DSS (Direct Station Selection) Button
• 2.1 Tone/Ring Tone List
• See the Installation Manual, Section 3, "Intercom Calling".
1-16
Operations
extension no.
Enter the extension number.
INTERCOM
extension no.
Enter the extension number.
Press the flexible button
assigned as a DSS button.
Talk.
Hang up.
SP-PHONE
Talk. Press SP-PHONE.
Talk. Hang up or press
SP-PHONE/MONITOR.
Disturb (DND)" feature.