Section 700 - Operation
Programming
Considerations
Technical Manuals Online! - http://www.tech-man.com
The Voice Mail Transfer Key may be assigned from a phone or through
system programming.
To assign a Voice Mail key from a phone:
1. Press the ON/OFF key.
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
2. Press PROG.
3. Press the FF key to be assigned as a Voice Mail Transfer Key.
4. Press CONF AUTO AUTO.
6. Enter any special codes required by the voice mail system.
Note: The length of the Voice Mail pilot number and special codes
combined cannot exceed six digits. If the VM number and the special
codes require more than six digits, assign the special codes to a personal
or system speed dial number and enter AUTO followed by the speed dial
bin number.
7. Press the HOLD key.
8. Press the ON/OFF key.
The ON/OFF LED goes off.
l
l
Key Assignment. The VMITRF key can be assigned to any key phone, DSSI
72 or EM/24. The VM/TRF key cannot be assigned to a One-Touch key.
Transfers. The VMITRF key can be used to transfer intercom as well as CO
calls to a voice mailbox.
Chapter 4. Key Telephone Features
4-99