Panasonic DBS 40 Operating Manual page 184

Chapter 4. Key Telephone Features
Technical Manuals Online! - http://www.tech-man.com
HOLD key.
7. Press the
To assign System Speed Dial numbers to One-Touch keys:
1. Press the ON/OFF key.
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
Press the PROG key.
2.
3. Press the One-Touch key to be programmed.
Press the AUTO key.
4.
5. Enter the System Speed Dial Number to be programmed.
HOLD
6. Press the
ON/OFF
7. Press the
The ON/OFF LED goes off.
To chain two to five System'Speed Dial numbers to a single One
Touch key:
ON/OFF key.
1. Press the
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
l
Press the PROG key.
2.
3. Press the One-Touch key to be programmed.
AUTO key.
4. Press the
5. Enter the System Speed Dial number for the pooled trunk access code.
[This preprogrammed System Speed Dial must contain a C (CONF)
followed by 9, 1-6 for pooled trunk access groups 9,81-86).]
6. If a pause is required, press the REDIAL key.
This inserts a pause between the access code and the telephone number.
When REDIAL is pressed, an "R" displays. If viewed later, a "P"
displays.
DBS Manual -
key.
key.
Issued 8/l/95
Section 700 - Operation