Intercom Calling - Panasonic KX-TA1232 Features Manual

General Features

Intercom Calling

Description
Allows the extension user to call another extension user within the system.
Conditions
• Extension numbers are assigned to all extensions by System Programming. An extension
number is programmed to be two, three, or four digits.
• Names can be given to extension numbers by System Programming. An extension number
and a name, if programmed, is shown on the display proprietary telephone during an
intercom call.
• DSS (Direct Station Selection) buttons permit one-touch access to an extension and provide
Busy Lamp Field.
• After dialing an extension number, the user will hear one of the following:
Ringback tone: indicates the other extension is being called.
Confirmation tone: indicates the user can perform Voice Calling.
Busy tone: indicates the other extension is busy.
Do Not Disturb (DND) tone: indicates the other extension has DND assigned.
Programming Guide References
• [003] Extension Number Set
• [004] Extension Name Set
• [005] Flexible CO Button Assignment
• [100] Flexible Numbering
Features Guide References
• Busy Lamp Field
• Button, Direct Station Selection (DSS)
User Manual References
• 2.2.2 Flexible Button Assignment
• 4.3.51 Intercom Calling
120 Features Guide