Download  Print this page

Panasonic DBS 40 Operating Manual Page 74

Digital business system.
Hide thumbs

Advertisement

Section 700 - Operation
3
4
5
6
Notes:
For TRS types 3-6 and the old numbering plan, operator calls are allowed if FF7 1# I# is set to
"on." The office code tables are used to restrict all 0 plus dialing; the next two digits will also
be analyzed.
For TRS types 2 to 6 and the new NANP (CPC-AWCPC-B Version 6.0 and later). operator
access is determined by an extension-based operator access switch. TRS Types 0 and 1 are fully
restricted and TRS Type 7 is not restricted.
For TRS types 2 to 6 beginning with CPC-AII/CPC-B Version 6.0,9 11 is always allowed.
For TRS types 3-6, area code and office code restrictions can be changed using "Area Code
Table For TRS Types 3-6, " "Office Code Table For TRS Types 3-6," "Special Area Code Table
For TRS Types 3-6," and "Special Office Code Table For TRS Types 3-6,"explained in Chap-
ter 8 of Programming (Section 400).
For TRS types 3-6. area and office code restrictions can be further managed using "Special
Area
found in Chapter 8 of Programming (Section 400). Four area codes can be associated with spe-
cial area code
of valid office codes can be individually allowed or restricted. Thus, the Special Area and
Office Codes work together to provide specific toll restrictions.
Technical Manuals Online! - http://www.tech-man.com
Full restriction of operator calls (old dialing plan).
Selectable restriction of operator calls (new NANP).
Selectable restriction of international calls (defaulted to full restriction -
Selectable restriction of Nil codes (211-911) (see Notes for 91 I).
Selectable restriction of Speed dial numbers.
Restriction of up to 50 seven-digit numbers.
Trunk calls can be answered and transferred.
Defaulted to full restriction of area-code dialing (see Notes).
Defaulted to full restriction of office-code dialing (see Notes).
Inter-digit timing is set to 6 seconds.
Identical to Type 3, except that office-code dialing is allowed by default:
type 4 also allows Operator Calls (old dialing plan) (See Notes).
Programmable TRS Type; defaulted to no restrictions (see Notes).
Programmable TRS Type: defaulted to no restrictions (see Notes).
No restriction of
Code
Table For TRS Types 3-6" and "Special Office Code Table For TRS Types 3-6"
l-4 (one area code per table). Within each of these tables, the entire range
tables
outbound dialing.
Chapter 2. System Features
,

Advertisement

Table of Contents

   Also See for Panasonic DBS 40

   Related Manuals for Panasonic DBS 40

This manual is also suitable for:

Dbs 96Dbs 72

Comments to this Manuals

Symbols: 0
Latest comments: