Fuel Mesh Filter Inspection; Fuel Pump And Fuel Level Gauge Reassembly And Installation - Suzuki VZR1800 2007 Service Manual

6-10 FUEL SYSTEM AND THROTTLE BODY

FUEL MESH FILTER INSPECTION

• Disconnect the clamp 1 and rubber boot 2.
If the fuel mesh filter is clogged with sediment or rust, replace
the fuel filter with a new one.
FUEL PUMP AND FUEL LEVEL GAUGE
REASSEMBLY AND INSTALLATION
Install the fuel pump and fuel level gauge in the reverse order of
removal and disassembly. Pay attention to the following points:
• Apply thin coat of engine oil to the new bushing and install if to
the fuel joint pipe.
"
Use the new bushing to prevent fuel leakage.
• Install the new O-ring to the pressure regulator.
• Apply thin coat of the engine oil to the new O-ring.
"
Use the new O-ring to prevent fuel leakage.
• Install the new O-ring to the fuel pipe.
• Apply thin coat of the engine oil to the new O-ring.
"
Use the new O-ring to prevent fuel leakage.