Important Notices; Safety Information - Siemens Hicom Office PhoneMail Supplement To The Installation And System Administration Manual

1

Important Notices

1.1

Safety Information

Only service personnel and authorized specialists are permitted to work on the installation. Ob-
serve the following information:
Read through all information on the equipment carefully, and follow all safety information.
Also obtain information concerning the emergency numbers.
Always contact your manager before starting any work where the necessary safety precau-
tions do not appear to be in place.
Types of safety information
This manual uses three types of safety information:
Danger

Danger symbols call attention to a situation that could cause serious injury or death
to a person.
Warning

Warning symbols call attention to a situation that could cause serious injury to a per-
son.
Caution

Caution symbols call attention to a situation that could damage or destroy hardware
or software.
Further symbols for defining the source of danger in greater detail
 
Electricity Weight
* Electrostatically sensitive device
1. These symbols are not usually used in the manual. They're an explanation of the symbols that can be depict-
ed on the systems.
A31003-S1220-D300-3-76D1, March 2000
HOP/HOP E, Version 2.0, Supplement to the Installation and System Administration Guide
 
Heat Fire
1
:
 
Chemicals ESD*
4890_imp.fm
Important Notices
Safety Information

Laser
1-1