Cisco Catalyst 2950 Command Reference Manual page 517

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
This example shows how to enable the shutdown action on a port:
Switch(config-if)# storm-control action shutdown
This example shows how to enable the trap action on a port:
Switch(config-if)# storm-control action trap
This example shows how to disable the shutdown action on a port:
Switch(config-if)# no storm-control action shutdown
You can verify your settings by entering the show storm-control privileged EXEC command.
Related Commands Command
show storm-control
0L-10102-01
Description
Displays the packet-storm control information.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
storm-control
2-489