Cisco Catalyst 2950 Command Reference Manual page 590

wrr-queue cos-map
CoS Value
Not applied
0, 1, 2, 3
4, 5
6, 7
In the previous example, CoS priority queue 1 is no longer used because no CoS value is assigned to the
queue.
You can set the CoS values to the default values by entering the no wrr-queue cos-map global
configuration command.
You can verify your settings by entering the show wrr-queue cos-map privileged EXEC command.
Related Commands Command
wrr-queue bandwidth
show wrr-queue bandwidth
show wrr-queue cos-map
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-564
Chapter 2
CoS Priority Queue
1
2
3
4
Description
Assigns weighted round-robin (WRR) weights to the four CoS
priority queues.
Displays the WRR bandwidth allocation for the four CoS
priority queues.
Displays the mapping of the CoS to the priority queues.
Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01