Reset - Cisco Catalyst 2950 Command Reference Manual

Appendix B Catalyst 2950 and 2955 Switch Boot Loader Commands

reset

Use the reset boot loader command to perform a hard reset on the system. A hard reset is similar to
power-cycling the switch, clearing the processor, registers, and memory.
Syntax Description This command has no arguments or keywords.
Command Modes
Boot loader
Command History Release
12.1(11)YJ
Examples This example shows how to reset the system:
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
Related Commands Command
boot
OL-10102-01
reset
Modification
This command was introduced.
Description
Loads and boots an executable image and enters the command-line interface.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
reset
B-19