Snmp-Server Host - Cisco Catalyst 2950 Command Reference Manual

snmp-server host

snmp-server host
Use the snmp-server host global configuration command to specify the recipient (host) of a Simple
Network Management Protocol (SNMP) notification operation. Use the no form of this command to
remove the specified host.
Syntax Description
host-addr
informs | traps
version {1 | 2c | 3}
community-string
alarms
bridge
c2900
cluster
config
copy-config
entity
envmon
flash
hsrp
mac-notification
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-434
snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth | priv}}]
community-string [alarms] [bridge] [c2900] [cluster] [config] [copy-config] [entity]
[envmon] [flash] [hsrp] [mac-notification] [port-security] [rtr] [snmp] [stpx] [syslog] [tty]
[udp-port port-number] [vlan-membership] [vlancreate] [vlandelete] [vtp]
no snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth | priv}}]
community-string
Name or Internet address of the host (the targeted recipient).
(Optional) Send SNMP traps or informs to this host.
(Optional ) Version of SNMP used to send the traps.
These keywords are supported:
1—SNMPv1. This option is not available with informs.
2c—SNMPv2C.
3—SNMPv3. These optional keywords can follow the version 3 keyword:
•
•
•
Password-like community string sent with the notification operation.
Though you can set this string by using the snmp-server host command,
we recommend that you define this string by using the snmp-server
community global configuration command before using the snmp-server
host command.
(Optional) Send SNMP alarm traps. This keyword is only available on a
Catalyst 2955 switch.
(Optional) Send SNMP STP bridge MIB traps.
(Optional) Send SNMP switch traps.
(Optional) Send cluster member status traps.
(Optional) Send SNMP configuration traps.
(Optional) Send SNMP copy-configuration traps.
(Optional) Send SNMP entity traps.
(Optional) Send enviromental monitor (EnvMon) traps.
(Optional) Send SNMP FLASH notifications.
(Optional) Send Hot Standby Router Protocol (HSRP) traps.
(Optional) Send MAC notification traps.
Chapter 2
auth (Optional). Enables Message Digest 5 (MD5) and Secure Hash
Algorithm (SHA) packet authentication.
priv (Optional). Enables Data Encryption Standard (DES) packet
encryption (also called privacy). The priv keyword is available only
when the cryptographic (encrypted) software image is installed.
Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01