Cisco Catalyst 2950 Command Reference Manual page 255

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Use the show mvr members privileged EXEC command to display the IP multicast group addresses
configured on the switch.
You can verify your settings by entering the show mvr privileged EXEC command.
Related Commands Command
mvr immediate
mvr type
mvr vlan group
show mvr
show mvr interface
show mvr interface
show mvr members
OL-10102-01
Description
Enables the Immediate-Leave feature on an interface.
Configures a port as a receiver or source port.
Configures a receiver port as a member of an MVR group.
Displays MVR global parameters or port parameters.
Displays the configured MVR interfaces with their type,
status, and Immediate-Leave configuration.
interface-id member Displays all MVR groups of which the interface is a
member.
Displays all ports that are members of an MVR multicast
group; if the group has no members, its status is shown as
Inactive.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
mvr
2-225