Show Mls Masks - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

show mls masks

Use the show mls masks user EXEC command to display the details of the access control parameters
(ACPs) used for quality of service (QoS) and security access control lists (ACLs).
This command is available only if your switch is running the enhanced software image (EI).
Syntax Description
qos
security
| begin
| exclude
| include
expression
ACPs are called masks in the command-line interface (CLI) commands and output.
Note
Command Modes User EXEC
Command History Release
12.1(6)EA2
Usage Guidelines
Use the show mls masks command without keywords to display all ACPs configured on the switch.
Use this command with the qos keyword to display the ACPs used for QoS ACLs.
Use this command with the security keyword to display the ACPs used for security ACLs.
You can configure up to four ACPs (QoS and security) on a switch.
Note
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
0L-10102-01
show mls masks [qos | security] [ | {begin | exclude | include} expression]
(Optional) Display ACPs used for QoS ACLs.
(Optional) Display ACPs used for security ACLs.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show mls masks
2-375