Cisco Catalyst 2950 Command Reference Manual page 352

Hide thumbs Also See for Catalyst 2950:
Table of Contents

Advertisement

show dot1x
BendSM State
ReAuthPeriod = 4000 Seconds { (From Authentication Server) | (Locally Configured) }
ReAuthAction = { Terminate | Reauthenticate }
TimeToNextReauth = 1453 Seconds
PortStatus
MaxReq
HostMode
Port Control
QuietPeriod
Re-authentication = Disabled
ReAuthPeriod
ServerTimeout
SuppTimeout
TxPeriod
Guest-Vlan
This is an example of output from the show dot1x statistics interface fastethernet0/3 command.
Table 2-16
Switch# show dot1x statistics interface fastethernet0/3
PortStatistics Parameters for Dot1x
--------------------------------------------
TxReqId = 15
RxStart = 4
RxInvalid = 0
RxVersion = 1
Table 2-16
Field
TxReqId
TxReq
TxTotal
RxStart
RxLogoff
RxRespId
RxResp
RxInvalid
RxLenErr
RxTotal
RxVersion
LastRxSrcMac
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-324
= IDLE
= AUTHORIZED
= 2
= Single (AUTH-FAIL-VLAN)
= Auto
= 60 Seconds
= 3600 Seconds
= 30 Seconds
= 30 Seconds
= 30 Seconds
= 0
describes the fields in the display.
TxReq = 0
TxTotal = 15
RxLogoff = 0
RxRespId = 1
RxLenErr = 0
RxTotal= 6
LastRxSrcMac 00d0.b71b.35de
show dot1x statistics Field Descriptions
Description
Number of Extensible Authentication Protocol (EAP)-request/identity frames
that have been sent.
Number of EAP-request frames (other than request/identity frames) that have
been sent.
Number of Extensible Authentication Protocol over LAN (EAPOL) frames of
any type that have been sent.
Number of valid EAPOL-start frames that have been received.
Number of EAPOL-logoff frames that have been received.
Number of EAP-response/identity frames that have been received.
Number of valid EAP-response frames (other than response/identity frames)
that have been received.
Number of EAPOL frames that have been received and have an unrecognized
frame type.
Number of EAPOL frames that have been received in which the packet body
length field is invalid.
Number of valid EAPOL frames of any type that have been received.
Received packets in the IEEE 802.1x Version 1 format.
Source MAC address carried in the most recently received EAPOL frame.
Chapter 2
Catalyst 2950 and 2955 Cisco IOS Commands
RxResp = 1
0L-10102-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2955

Table of Contents