Spanning-Tree Mst Hello-Time - Cisco Catalyst 2950 Command Reference Manual

spanning-tree mst hello-time

spanning-tree mst hello-time
Use the spanning-tree mst hello-time global configuration command to set the interval between hello
bridge protocol data units (BPDUs) sent by root switch configuration messages. Use the no form of this
command to return to the default setting.
Syntax Description
seconds
Defaults
The default is 2 seconds.
Command Modes Global configuration
Command History Release
12.1(9)EA1
12.1(20)EA2
Usage Guidelines After you set the spanning-tree mst max-age seconds global configuration command, if a switch does
not receive BPDUs from the root switch within the specified interval, the switch recomputes the
spanning-tree topology. The max-age setting must be greater than the hello-time setting.
Changing the spanning-tree mst hello-time command affects all spanning-tree instances.
Examples This example shows how to set the spanning-tree hello time to 3 seconds for all MST instances:
Switch(config)# spanning-tree mst hello-time 3
You can verify your settings by entering the show spanning-tree mst privileged EXEC command.
Related Commands Command
show spanning-tree
spanning-tree mst
forward-time
spanning-tree mst max-age
spanning-tree mst max-hops
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-462
spanning-tree mst hello-time seconds
no spanning-tree mst hello-time
Interval between hello BPDUs sent by root switch configuration messages. The
range is 1 to 10 seconds.
Modification
This command was introduced.
This command was added to the standard software image (SI).
mst
Chapter 2
Description
Displays multiple spanning-tree (MST) information.
Sets the forward-delay time for all MST instances.
Sets the interval between messages that the spanning tree receives
from the root switch.
Sets the number of hops in a region before the BPDU is discarded.
Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01