Cisco Catalyst 2950 Command Reference Manual page 70

clear controllers ethernet-controller
Examples This example shows how to clear the Ethernet link statistics for an LRE port:
Switch# clear controllers ethernet-controller longreachethernet0/1
This example clears the Ethernet statistics for all the CPE Ethernet ports on a Cisco 585 LRE CPE:
Switch# clear controllers ethernet-controller longreachethernet0/1 cpe
You can verify that information was deleted by entering the show controllers ethernet-controller user
EXEC command.
Related Commands Command
show controllers
ethernet-controller
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-40
Chapter 2
Description
Displays per-interface transmit and receive statistics read from the
hardware, the interface internal registers, the statistics read from
LRE and CPE ports.
Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01