Show Env - Cisco Catalyst 2950 Command Reference Manual

show env

show env
Use the show env privileged EXEC command to display the status of environmental facilities on the
Catalyst 2955 switch.
Note This command is supported with different keywords on the Catalyst 2950 platform.
Syntax Description all
power
temperature
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.0(5.2)WC(1)
12.1(12c)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show env power command. It shows the status of all power
supplies on the switch.
Switch# show env power
Power supply A is present
Power supply B is present
This is an example of output from the show env temperature command. It shows temperature status on
the switch.
Switch# show env temperature
Current temperature is 49C
Highest temperature was 53C Mar 04 1993 04:06:36
Catalyst 2950 and Catalyst 2955 Switch Command Reference
A-16
show env {all | power | temperature}[ | {begin | exclude | include} expression]
Display power supply and temperature environmental status.
Display power supply environmental status.
Display temperature environmental status.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The power and temperature keywords were added.
Appendix A Catalyst 2955 Alarm Commands
OL-10102-01