Lre Upgrade Default Family - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

lre upgrade default family

Use the lre upgrade default family global configuration command to define a map between a
Long-Reach Ethernet (LRE) device and an LRE binary. Use the no form of this command to return to
the default setting.
This command is available only on Catalyst 2950 LRE switches.
Syntax Description
device-family
model model
revision revision
binary LRE binary
Defaults
No default is defined. The system selects the binary file.
Command Modes Global configuration
Command History Release
12.1(11)YJ
12.1(11)YJ4
Usage Guidelines Use the lre upgrade default family device-family binary configuration command to override the default
behavior for upgrading LRE firmware. Use this command when you want to upgrade all CPE devices or
local controllers of a given family to an LRE binary version.
The name of the LRE binary must be entered as it appears in the flash memory. Use the show lre
Note
upgrade binaries command to determine the flash filename of an LRE binary.
Examples
This example shows how to configure all CISCO585-LRE CPE devices to upgrade with the LRE binary
file CISCO-585-LRE_vdslsngl_51.00.00:
Switch(config)# lre upgrade default family cisco585-lre binary
cisco585-lre_vdslsngl_51.00.00.bin
OL-10102-01
lre upgrade default family device-family {model model {revision revision | binary LRE binary} |
binary LRE binary}
no lre upgrade default family device-family {model model {revision revision | binary LRE
binary} | binary LRE binary}
Type of device that contains the chipset to be upgraded. Valid values are
cisco575-lre, cisco585-lre, cisco576-lre997, and cisco2950-lre.
Specify the model number of the device family; for example, a model can be
cisco585-lre.
(Optional) Specify the revision of the target device.
(Optional only if it is entered with the model keyword) Specify the LRE
binary file being applied.
Modification
This command was introduced.
The cisco576-lre997 value was added.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
lre upgrade default family
2-183