Cisco Catalyst 2950 Command Reference Manual page 319

Hide thumbs Also See for Catalyst 2950:
Table of Contents

Advertisement

Chapter 2
Catalyst 2950 and 2955 Cisco IOS Commands
LRE Enet Stats on Switch:
Transmit
Table 2-12
LRE Enet Stats on Switch Field Descriptions
Field
Description
Transmit
Bytes
The total number of bytes sent on an interface.
Frames
The total number of frames sent on an interface.
Pause frames
The number of pause frames sent on an interface.
1 collision frames
The number of frames that are successfully sent on an interface after one collision occurs.
Multiple collisions
The number of frames that are sent after more than one collision occurs.
Late collisions
After a frame is sent, the number of times that a collision is detected on an interface later than 512
bit times.
Excessive collisions
The number of frames that could not be sent on an interface because more than 16 collisions occurs.
Deferred frames
The number of frames that are not sent on an interface.
Carrier sense errors
The number of frames with carrier sense errors.
Receive
Bytes
The total amount of memory (in bytes) used by frames received on an interface, including the FCS
value and the incorrectly formed frames. This value excludes the frame header bits.
Frames
The total number of frames received on an interface, including broadcast frames and incorrectly
formed frames.
Broadcast frames
The total number of frames successfully received on an interface that are directed to broadcast
addresses.
Pause frames
The number of pause frames received on an interface.
Alignment errors
The total number of frames received on an interface that have alignment errors.
Collisions and Runts
The number of frames that could not be received on an interface because of collisions because the
frame length (in bytes) is too small.
Receive
Oversize frames
The total number of frames that are the larger than the maximum allowed frame size.
FCS errors
The total number of frames received on an interface that have a valid length (in bytes) but do not
have the correct FCS values.
0L-10102-01
0 256 to 511 byte frames
0 512 to 1023 byte frames
0 1024 to 1518 byte frames
0 1519 to 1522 byte frames
0 Bytes
0 Frames
0 Pause frames
0 1 collision frames
0 Multiple collisions
0 Late collisions
0 Excessive collisions
0 Deferred frames
0 Carrier sense errors
Receive
0 Bytes
0 Frames
0 Broadcast frames
0 Pause frames
0 Alignment errors
0 Collisions and Runts
0 Oversize frames
0 FCS errors
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show controllers ethernet-controller
2-291

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2955

Table of Contents