Clear Pagp - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

clear pagp

Use the clear pagp privileged EXEC command to clear Port Aggregation Protocol (PAgP)
channel-group information.
Syntax Description channel-group-number
counters
Defaults This command has no default setting.
Command Modes Privileged EXEC
Command History Release
12.1(6)EA2
Examples This example shows how to clear channel-group information for a specific group:
Switch# clear pagp 4
This example shows how to clear channel-group traffic counters:
Switch# clear pagp counters
You can verify that the information was deleted by entering the show pagp privileged EXEC command.
Related Commands Command
show pagp
OL-10102-01
clear pagp {channel-group-number [counters] | counters}
Channel group number. The range is 1 to 6.
Clear traffic counters.
Modification
This command was introduced.
Description
Displays PAgP channel-group information.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
clear pagp
2-49