Cisco Catalyst 2950 Command Reference Manual page 326

show controllers lre cpe
This is an example of output from the show controllers lre cpe protected command that shows the CPE
protected-port information for an LRE interface:
Switch# show controllers lre cpe protected longreachethernet0/9
Interface
---------
This is an example of output from the show controllers lre cpe protected command that shows the CPE
protected-port information for all LRE interfaces:
Switch# show controllers lre cpe protected
Interface
---------
<output truncated>
This is an example of output from the show controllers lre cpe version command:
Switch# show controllers lre cpe version longreachethernet0/5
Interface
---------
Lo0/5
Related Commands Command
cpe protected
show controllers lre version
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-298
Port Protected
---- ---------
Lo0/9 1 true
Lo0/9 2 true
Lo0/9 3 true
Lo0/9 4 true
Port Protected
---- ---------
Lo0/1 1 NA
Lo0/2 1 NA
Lo0/3 1 NA
Lo0/4 1 NA
Lo0/5 1 NA
Lo0/6 1 NA
Lo0/7 1 NA
Lo0/8 1 false
Lo0/8 2 false
Hw Sw Patch
--- --- ------ ----- -----
52 B4 51
Chapter 2
Boot App
1.02 1.02
Description
Restricts data traffic to individual ports on Cisco 585 LRE CPE
ports.
Displays the version number of the hardware, software, and patch
software components of the switch LRE interface and the CPE LRE
interface.
Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01