Debug Pagp - Cisco Catalyst 2950 Command Reference Manual

Appendix C Catalyst 2950 and 2955 Switch Debug Commands

debug pagp

Use the debug pagp privileged EXEC command to enable debugging of Port Aggregation Protocol
(PAgP) activity. Use the no form of this command to disable debugging.
Syntax Description
all
event
fsm
misc
packet
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines
The undebug pagp command is the same as no debug pagp command.
Related Commands Command
show debugging
show pagp
OL-10102-01
debug pagp [all | event | fsm | misc | packet]
no debug pagp [all | event | fsm | misc | packet]
(Optional) Display all PAgP debug messages.
(Optional) Display PAgP event debug messages.
(Optional) Display PAgP finite state-machine debug messages.
(Optional) Display miscellaneous PAgP debug messages
(Optional) Display PAgP packet debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference for IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Displays PAgP channel-group information.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
debug pagp
C-7